Archive for the 'GE Intelligent Platforms' Category

Oct 02 2009

Configuration of Modbus Driver v7.42 Ifix 5.0 for OMNI 6000

Published under GE Intelligent Platforms, OMNI Flow Computers

On the previous article, I have explain how to configure Ifix 5.0 SCADA/HMI to perform the modbus communication with VersaMax40. So then on these chapter, I just explain how to configure Modbus Driver v7.42 Ifix 5.0 SCADA/HMI to collect several data from modbus register on OMNI 6000. OMNI 6000 is the latest Gas [...]

Tags: ,

No responses yet                                                                                                               Print This Post Print This Post

Sep 02 2009

Modbus TCP Protocol between VersaMax40 and Ifix 5.0

Published under GE Intelligent Platforms

I would like share with you how to perform the modbus TCP/IP communication between Micro PLC VersaMax and HMI Ifix 5.0 from GE Fanuc Automation.  VersaMax are nano or micro PLC from GE Fanuc Automation. There are several type of VersaMax :

VersaMax Nano 10 (6 in/4 out built-in discrete I/O)
VersaMax Micro 14 (8 in/6 out [...]

Tags: , ,

No responses yet                                                                                                               Print This Post Print This Post