Hydrogen-FC Ltd. » GE Intelligent Platforms http://www.hydrogen-fc.com Automation and Global Partnerships for Hydrogen Power Tue, 31 Aug 2010 00:16:53 +0000 en hourly 1 http://wordpress.org/?v=3.0.1 Modbus TCP between HMI Ifix5.0 and Flow Computer OMNI6000 http://www.hydrogen-fc.com/modbus-tcp-protocol-between-omni-6000-and-ifix-5-0/ http://www.hydrogen-fc.com/modbus-tcp-protocol-between-omni-6000-and-ifix-5-0/#comments Thu, 01 Oct 2009 17:23:52 +0000 admin http://www.hydrogen-fc.com/?p=124 Our previous article had explained how to configuring Modbus TCP protocol between HMI Ifix5.0 and PLC VersaMax40. So that on these article we just explain how to create register blocks and few setup on Modbus Driver v.7.42 Ifix5.0 so that HMI Ifix5.0 as Client device could send/receive data from Flow Computer OMNI6000 as Server device.

OMNI6000 is latest Flow Computer from OMNIFLOW Inc. OMNI6000 suitable to be used as deterministic electronic flow/energy correction on metering measurement of crude oils, refined products, NGLs, LPGs, ethylene, propylene, natural gas, and specially gases, such as Oxygen, Nytrogen, Hydrogen, Water, and Carbon Dioxide. OMNI6000 suitable to be used for Orifice Plate or Turbin Meter metering system.

Modbus Register of Current Datetime Data Block - Datetime
Current – Hour : 403868
Current – Minute : 403869
Current – Second : 403870
Current – Month : 403871
Current – Day of Month : 403872
Current – Year : 403873
Current – Day of Week : 403874
Advanced Data Block Settings
Size of Registers : 2 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : FALSE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of AGA 8 – 1994/1992 Components Override Value Data Block - AGA8
Product #1 – Mol % – Methane : 417231
Product #1 – Mol % – Nitrogen : 417232
Product #1 – Mol % – Carbon Dioxide : 417233
Product #1 – Mol % – Ethane : 417234
Product #1 – Mol % – Propane : 417235
Product #1 – Mol % – Water : 417236
Product #1 – Mol % – Hydrogen Sulfide : 417237
Product #1 – Mol % – Hydrogen : 417238
Product #1 – Mol % – Carbon Monoxide : 417239
Product #1 – Mol % – Oxygen : 417240
Product #1 – Mol % – i-Butane : 417241
Product #1 – Mol % – n-Butane : 417242
Product #1 – Mol % – i-Pentane : 417243
Product #1 – Mol % – n-Pentane : 417244
Product #1 – Mol % – n-Hexane : 417245
Product #1 – Mol % – n-Heptane : 417246
Product #1 – Mol % – n-Octane : 417247
Product #1 – Mol % – n-Nonane : 417248
Product #1 – Mol % – n-Decane : 417249
Product #1 – Mol % – Helium : 417250
Product #1 – Mol % – Argon : 417251
Product #1 – Viscosity : 417252
Product #1 – Isentropic Exponent K : 417253
Product #1 – Heating Value : 417254
Product #1 – Reference Specific Gravity : 417255
Product #1 – Reference Density : 417256
Product #1 – Water Content : 417257
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Gas Chromatograph Data & Auxilliary Parameter Data Block - GC_AUX
Analyzer Component #1 : 417351
Analyzer Component #2 : 417352
Analyzer Component #3 : 417353
Analyzer Component #4 : 417354
Analyzer Component #5 : 417355
Analyzer Component #6 : 417356
Analyzer Component #7 : 417357
Analyzer Component #8 : 417358
Analyzer Component #9 : 417359
Analyzer Component #10 : 417360
Analyzer Component #11 : 417361
Analyzer Component #12 : 417362
Analyzer Component #13 : 417363
Analyzer Component #14 : 417364
Analyzer Component #15 : 417365
Analyzer Component #16 : 417366
Analyzer Component #17 : 417367
Analyzer Component #18 : 417368
Analyzer Component #19 : 417369
Analyzer Component #20 : 417370
Analyzer Component #21 : 417371
Analyzer Component #22 : 417372
Analyzer Component #23 : 417373
Analyzer Component #24 : 417374
Analyzer Component #25 (Actual BTU) : 417375
Analyzer Component #26 (Dry BTU) : 417376
Analyzer Component #27 (Specific Gravity) : 417377
Analyzer Component #28 : 417378
Analyzer Component #29 : 417379
Analyzer Component #30 : 417380
Auxilliary Input #1 – Low Limit : 417381
Auxilliary Input #1 – High Limit : 417382
Auxilliary Input #1 – Override Value : 417383
Auxilliary Input #1 – @ 4mA : 417384
Auxilliary Input #1 – @ 20 mA : 417385
Auxilliary Input #2 – Low Limit : 417386
Auxilliary Input #2 – High Limit : 417387
Auxilliary Input #2 – Override Value : 417388
Auxilliary Input #2 – @ 4mA : 417389
Auxilliary Input #2 – @ 20 mA : 417390
Auxilliary Input #3 – Low Limit : 417391
Auxilliary Input #3 – High Limit : 417392
Auxilliary Input #3 – Override Value : 417393
Auxilliary Input #3 – @ 4mA : 417394
Auxilliary Input #3 – @ 20 mA : 417395
Auxilliary Input #4 – Low Limit : 417396
Auxilliary Input #4 – High Limit : 417397
Auxilliary Input #4 – Override Value : 417398
Auxilliary Input #4 – @ 4mA : 417399
Auxilliary Input #4 – @ 20 mA : 417400
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Auxilliary Live Value Data Block - AUX
Auxilliary Input #1 : 407810
Auxilliary Input #2 : 407811
Auxilliary Input #3 : 407812
Auxilliary Input #4 : 407813
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Stream A Live Value Data Block - Stream A
Flow Rate – Gross (MACF/hr or m3/hr) : 407102
Flow Rate – Net (MSCF/hr or m3/hr) : 407103
Flow Rate – Mass (Klb/hr or ton/hr) : 407104
Flow Rate – Energy (MMBTU/hr or GJ/hr) : 407105
Temperature : 407106
Pressure : 407107
Orifice – Diameter : 407113
Meter Tube Diameter : 407118
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Stream B Live Value Data Block - Stream B
Flow Rate – Gross (MACF/hr or m3/hr) : 407202
Flow Rate – Net (MSCF/hr or m3/hr) : 407203
Flow Rate – Mass (Klb/hr or ton/hr) : 407204
Flow Rate – Energy (MMBTU/hr or GJ/hr) : 407205
Temperature : 407206
Pressure : 407207
Orifice – Diameter : 407213
Meter Tube Diameter : 407218
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Transmitter Stream A Parameter Data Block - FT TT PT Stream A
Orifice Plate – Reference Temperature : 407148
Meter Tube – Reference Temperature : 407151
Differential Pressure – Low Limit : 407153
Differential Pressure – High Limit : 407154
Differential Pressure – Override Value : 407155
Low Range – Differential Pressure – @ 4mA : 407156
Low Range – Differential Pressure – @ 20mA : 407157
Meter Temperature – Low Limit : 407164
Meter Temperature – High Limit : 407165
Meter Temperature – Override : 407166
Meter Temperature – @ 4mA : 407167
Meter Temperature – @ 20mA : 407168
Meter Pressure – Low Limit : 407169
Meter Pressure – High Limit : 407170
Meter Pressure – Override : 407171
Meter Pressure – @ 4mA : 407172
Meter Pressure – @ 20mA : 407173
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Transmitter Stream B Parameter Data Block - FT TT PT Stream B
Orifice Plate – Reference Temperature : 407248
Meter Tube – Reference Temperature : 407251
Differential Pressure – Low Limit : 407253
Differential Pressure – High Limit : 407254
Differential Pressure – Override Value : 407255
Low Range – Differential Pressure – @ 4mA : 407256
Low Range – Differential Pressure – @ 20mA : 407257
Meter Temperature – Low Limit : 407264
Meter Temperature – High Limit : 407265
Meter Temperature – Override : 407266
Meter Temperature – @ 4mA : 407267
Meter Temperature – @ 20mA : 407268
Meter Pressure – Low Limit : 407269
Meter Pressure – High Limit : 407270
Meter Pressure – Override : 407271
Meter Pressure – @ 4mA : 407272
Meter Pressure – @ 20mA : 407273
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of In Progress Batch, Cumm, Daily Live Value Stream A Data Block - In Batch Day Stream A
Batch in Progress – Gross Totalizer : 405102
Batch in Progress – Net Totalizer : 405103
Batch in Progress – Mass Totalizer : 405104
Batch in Progress – Energy Totalizer : 405105
Cummulative in Progress – Gross Totalizer : 405106
Cummulative in Progress – Net Totalizer : 405107
Cummulative in Progress – Mass Totalizer : 405108
Cummulative in Progress – Energy Totalizer : 405109
Today In Progress – Gross Totalizer : 405110
Today In Progress – Net Totalizer : 405111
Today In Progress – Mass Totalizer : 405112
Today In Progress – Energy Totalizer : 405113
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of In Progress Batch, Cumm, Daily Live Value Stream B Data Block - In Batch Day Stream B
Batch in Progress – Gross Totalizer : 405202
Batch in Progress – Net Totalizer : 405203
Batch in Progress – Mass Totalizer : 405204
Batch in Progress – Energy Totalizer : 405205
Cummulative in Progress – Gross Totalizer : 405206
Cummulative in Progress – Net Totalizer : 405207
Cummulative in Progress – Mass Totalizer : 405208
Cummulative in Progress – Energy Totalizer : 405209
Today In Progress – Gross Totalizer : 405210
Today In Progress – Net Totalizer : 405211
Today In Progress – Mass Totalizer : 405212
Today In Progress – Energy Totalizer : 405213
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of In Progress Hourly Live Value Stream A Data Block - In Hourly Stream A
In Progress – Gross Total for Hour : 405145
In Progress – Net Total for Hour : 405146
In Progess – Mas Total for Hour : 405147
IN Progress – Energy Total for Hour : 405148
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of In Progress Hourly Live Value Stream B Data Block - In Hourly Stream B
In Progress – Gross Total for Hour : 405245
In Progress – Net Total for Hour : 405246
In Progess – Mas Total for Hour : 402247
IN Progress – Energy Total for Hour : 405248
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Previous, Hour, Cumm Live Value Stream A Data Block - Pr Hour Cumm Stream A
Increment – Gross Totalizer : 405171
Increment – Net Totalizer : 405172
Increment – Mass Totalizer : 405173
Increment – Energy Totalizer : 405174
Previous Hourly – Gross Total : 405175
Previous Hourly – Net Total : 405176
Previous Hourly – Mass Total : 405177
Previous Hourly – Energy Total : 405178
Previous Batch – Opening Gross : 405179
Previous Batch – Opening Net : 405180
Previous Batch – Opening Mass : 405181
Previous Batch – Opening Energy : 405182
Previous Day’s – Opening Gross : 405183
Previous Day’s – Opening Net : 405184
Previous Day’s – Opening Mass : 405185
Previous Day’s – Opening Energy : 405186
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
Modbus Register of Previous, Hour, Cumm Live Value Stream B Data Block - Pr Hour Cumm Stream B
Increment – Gross Totalizer : 405271
Increment – Net Totalizer : 405272
Increment – Mass Totalizer : 405273
Increment – Energy Totalizer : 405274
Previous Hourly – Gross Total : 405275
Previous Hourly – Net Total : 405276
Previous Hourly – Mass Total : 405277
Previous Hourly – Energy Total : 405278
Previous Batch – Opening Gross : 405279
Previous Batch – Opening Net : 405280
Previous Batch – Opening Mass : 405281
Previous Batch – Opening Energy : 405282
Previous Day’s – Opening Gross : 405283
Previous Day’s – Opening Net : 405284
Previous Day’s – Opening Mass : 405285
Previous Day’s – Opening Energy : 405286
Advanced Data Block Settings
Size of Registers : 4 Bytes
Swap Bytes : TRUE
Swap Long Words : FALSE
Swap Words : TRUE
Accept Unsolited Messages : TRUE
Disable Output : FALSE
Enable Block Writes : FALSE
Enable Latch Data : FALSE
]]> http://www.hydrogen-fc.com/modbus-tcp-protocol-between-omni-6000-and-ifix-5-0/feed/ 1 Modbus TCP between HMI Ifix5.0 and PLC VersaMax40 http://www.hydrogen-fc.com/modbus-tcp-protocol-between-versamax40-and-ifix-5-0/ http://www.hydrogen-fc.com/modbus-tcp-protocol-between-versamax40-and-ifix-5-0/#comments Tue, 01 Sep 2009 17:07:28 +0000 admin http://www.hydrogen-fc.com/?p=123

VersaMax40 is one kind of VersaMax Micro Plus Controllers from GE Intelligent Platforms that have more enhanced features like : more memory (for boolean, integer, floating data), real time clock (RTC),  optional port for industrial protocol communication, high speed counter (HSC) up to 4 at 100kHz, pulse width modulation (PWM) up to 4 at 65kHz, motion commands, PID function and subroutines. VersaMax40 limited to 152  maximum physical I/O with up to 4 I/O expansion units.

VersaMax40 have 1 RS-232 and second port option for RS-232/RS-485/USB/Ethernet. Usually, 1 RS-232 port defined as  SNP port mode for PLC programming with Proficy Machine Edition. On This application we will use second port option to add ethernet communication module – IC200UEM001. With this communication module we could self-defined VersaMax40 as Server device that communicate with HMI Ifix5.0 as Client device via Modbus TCP protocol. With ethernet communication module, VersaMax40 could handle up to 8 Clients device simultaneous on Modbus TCP network. Please following GFK-2436B for detail instruction.

Configuring VersaMax40 with Proficy Machine Edition Software

To configure second port option that available on VersaMax40 for Modbus TCP protocol, we should using Proficy Machine Edition software via port 1 RS-232. Port 1 RS-232 on VersaMax40 using RJ45 connector. Below the cable connection between DB9 connector to RJ45 connector.

DB9_to_RJ45

DB9_to_RJ45_Table

Configuring IC200UEM001 as Modbus TCP Server

Factory configuration for ethernet communication module – IC200UEM001 is GE Fanuc SRTP function. With these function we could setting the permanent IP address then connect Proficy Machine Edition via crossover ethernet cable to program PLC VersaMax40. To set IC200UEM001 with Modbus TCP Server function please following below  step :

  1. Connect IC200UEM001 to computer using crossover ethernet cable.
  2. Replace GE Fanuc SRTP with Modbus TCP Server firmware using PumpKIN Utility software. Following GFK2436B for detail instruction.

    3. PumpKIN-Utility

  3. Open Modbus Tester (ex. Modscan) software and testing these below register :
    • Physical input address on VersaMax40 are %I00001 – %I00024 similar with modbus register 100001 – 100024.
    • Physical output address on VersaMax40 are %Q00001 – %Q00016 similar with modbus register 100001 – 100016.
    • Memory (unsigned integer) data on VersaMax40 are %R00001 – etc similar with modbus register 400001  – etc.

Connect HMI Ifix5.0 to PLC VersaMax40

SCUConfiguring SCU Ifix5.0 :

  1. Click Ifix 5.0 shortcut.
  2. Click SCU (System Configuration Utility).
  3. Click Configure.
  4. Select Enable SCADA support.
  5. Find I/O Driver Name : MBE Modbus Ethernet and click Add.
  6. Click Configure the I/O Driver.
  7. Click Connect to MBE I/O driver.
  8. Save SCU configuration.

Configuring MBE I/O driver Ifix5.0 :

  1. Click Add New Ethernet Port channel and enable it.
  2. Click Add New Device and enable it. Then fill the form for IP address, maximum block, timeout, addressing mode and bit mode swapping register.
  3. Click Add New Block and enable it. Then spit each type modbus register.  These is an example of MBE I/O driver configuration.
  4. Save MBE I/O driver configuration and close all Ifix5.0 application.

Database Manager

Configuring Database Manager Ifix5.0 :

  1. Click Ifix5.0 shorcut.
  2. Click Application.
  3. Click Database Manager.
  4. Add tagname name, tagname type, I/O driver, I/O addresss.
  5. Save all configuration on Database Manager.

After that, create simple animation or symbol in HMI Ifix5.0 that connected to I/O tagname. All I/O tagname are defined in Database Manager.

For the information, Ifix5.0 support with Visual Basic syntax. It means  that HMI Ifix5.o support for customable HMI programming (ex.  programming database to Access, MySQL, SQL Server, etc). With this capability, you could self-programming to create HMI based on your application/project.

MBE Configuration

]]> http://www.hydrogen-fc.com/modbus-tcp-protocol-between-versamax40-and-ifix-5-0/feed/ 0